On page 4 of its datasheet we can see that it accepts 3.3 V as power supply, we can therefore use a common Raspberry Pi as a programmer. Searching on Google the code written on it confirms that it is a SPI flash chip. Recent motherboards (especially the desktop ones) uses SOIC-8 SPI flash chips, which are quite easy to locate and deal with. Internal flashing, on this board using the UEFI flash toolĮven if you want to use the internal flashing method, you should locate the flash chip and check whether it is supported by flashrom, to unbrick the board in case something goes wrong.External flashing, heavily recommended (and used in this example).Step 1: locate the SPI flash chipĪs usual, you can flash the modified firmware in two ways: It is sold without a CPU, therefore we are sure that Intel Boot Guard is not set in Verified Mode, and there are good chances that it will work with a disabled Intel ME. ![]() This board has a Sunrise Point PCH and comes with Intel ME version 11. As a reference, I'll explain here the full process to apply me_cleaner on my MSI H110M ECO.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |